Filter
Top Products
Configuration through the web interface
118
Advanced network settings
The Advanced Network Settings are used to further define the network interface,
including:
Host name: The Host name to be placed in the DHCP Option 12 field. This is
an optional setting which is only used when DHCP is enabled.
Enable Auto IP address assignment: Whether Auto-IP address assignment is
enabled or disabled.
Ethernet Interface speed and duplex mode (Auto, Half-Duplex, or Full
Duplex).
TCP keep-alive settings: The DHCP server assigns these network settings,
unless they are manually set here. To manually set and override these settings,
select Ignore TCP Keep-Alive settings from DHCP and specify the values
for Idle Timeout, Probe Interval, and whether an extra byte should be stored
in TCP keep-alive packets.