DNswitch 800 Configuring and Monitoring the Switch 15
Security Configuration
Use the Security Configuration screen to restrict management access
based on a specified password. The Administrator has write access for
parameters governing the switch. You should therefore assign a
password to the Administrator as soon as possible, and store it in a safe
place. (If for some reason your password is lost, or you cannot gain
access to the system’s configuration program, contact Digital Networks
Technical Support for assistance.)
Change Password
Figure 3-7. Change Password
This password is for the system Administrator, with access privilege of
Read/Write for all screens. Passwords can consist of up to 11
alphanumeric characters and are not case sensitive.
(User name: admin; default password: null)