Filter
Top Products
32 Configuring and Monitoring the Switch DNswitch 800
VLAN Current Table
This screen shows the current port members of each VLAN and whether
or not the port supports VLAN tagging. Ports assigned to a large VLAN
group that crosses several switches should use VLAN tagging. However,
if you just want to create a small port-based VLAN for one or two switches,
you can assign ports to the same untagged VLAN (page 36). The current
configuration is shown in the following screen.
Figure 3-24. VLAN Current Table
Parameter Description
VLAN Entry Delete
Count
The number of times a VLAN entry has been deleted from this
table.
VLAN ID The ID for the VLAN currently displayed.
Up Time at Creation The value of sysUpTime (System Up Time) when this VLAN
was created.
Status Shows how this VLAN was added to the switch:
Dynamic GVRP: Automatically learned via GVRP.
Permanent: Added as a static entry.
Egress Ports Shows the ports which have been added to the displayed VLAN
group.
Untagged Ports Shows the untagged VLAN port members.