Filter
Top Products
16 Configuring and Monitoring the Switch DNswitch 800
Firmware Upgrade Options
You can upgrade system firmware via a Web browser, a TFTP server, or
a direct connection to the console port (refer to the DNswitch 800
Management Guide).
Web Upload Management
Use the Web Upload Management menu to load software updates into
the switch. The upload file should be a DNswitch 800 binary file from
Digital Networks; otherwise the switch will not accept it. The success of
the upload operation depends on the quality of the network connection.
After uploading the new software, the switch will automatically restart
itself. Parameters shown on this screen are indicated in the following
figure and table.
Figure 3-8. Web Upload Management
Parameter Description
Upload Mode Indicates an upload to permanent flash ROM.
File Name The binary file to download. Use the browse button to locate the
file on your local network.
Start Web Upload Starts uploading the file over the network.