Filter
Top Products
53
Chapter 6 - Troubleshooting
In the event that you are unable to connect to or use your
Broadband Router, please refer to the following troubleshooting guide.
After each problem description, a possible cause and problem resolution is
provided. If this section does not help you fix the problem, go to the
D-Link web site (www.dlink.com) for additional troubleshooting tips. If
neither of these helps, please contact D-Link Technical Support for
additional help. The phone numbers for Technical Support are in the
appendix of this manual under D-Link Offices.
Basic Functions
My Broadband Router will not turn on. No LED’s light up.
Cause:
§ The power is not connected or the power switch is set to “Off”.
Resolution:
§ Connect the power adapter to your Broadband Router and plug it into
the power outlet.
§ Make sure that the power switch is set to “On”.
Note: Only use the power adapter provided with your Broadband Router.
Using any other adapter may damage your Broadband Router.
LED’s don’t follow the correct boot-up sequence.
Cause:
§ The unit has a corrupt firmware.
§ The unit is not receiving the correct voltage from the power supply.