Filter
Top Products
5
Rear Panel Connectors
Network Cable Connector
The Print Server’s rear panel feature an RJ-45 connector for connection to 10Base-T
Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5
twisted-pair cable). The port supports the NWay protocol, allowing the Print Server to
automatically detect or negotiate the transmission speed of the network.
Reset Button
Press and release this button to reset the MFP Server; or press and hold this button
for three seconds until the USB1, USB2, and LPT LEDs on the front panel light up
and then release the button, the MFP Server will resume the factory default settings.
DC Power Connector
The DC power input connector is located on the Print Server’s rear panel and is
labeled DC 5V.