Filter
Top Products
Firewall
Dlink DRO-210i User Guide 45
After entering all the information press the Apply button and the status table will now be
displayed at the bottom of the page. Press Delete button for deleting the corresponding
entry.
7.1.7 MAC Filter
MAC Filter feature can be used to block all traffic from a specific user’s system. The
user’s system can be uniquely identified by its MAC Address.
In Outbound Policies, select Blocked MAC (under MAC Filter) to go to the Blocked
MAC Address configuration page.
Add Blocked MAC Address
MAC Address
MAC Address to be blocked
DHCP Client
The MAC Address to be blocked can also be chosen from the
list of DHCP Clients.
After entering all the information press the Apply button and the status table will now be
displayed at the bottom of the page. Press Delete button for deleting the corresponding
entry.
7.1.8 Blocking Log
This list shows what traffic has been blocked by the Firewall Policy and the reason for
blocking.
Select Status →
→→
→ Log Tables →
→→
→ Blocking Log to view the Blocking Log Table as
explained below.
Blocking Log Table
Blocking Time
Displays the time when the blocking happened.
Transport Type
Displays the transport type.
Source
Displays the source IP address that was blocked.
Destination
Displays the destination IP that was blocked.
Blocking Reason
Displays the reason why the packet was blocked.
Web UI
Web UI