Filter
Top Products
Section 4 - Troubleshooting
D-Link DSL-2740B User Manual
41
OUTBOUND IP FILTER
By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by
specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect.
To access the OUTBOUND IP FILTER setting window, click on the Outbound Filter button in the ADVANCED directory.
ADD OUTBOUND IP FILTER
Enter the Filter name and at least one of the
following criteria: Protocol, Source/Destination IP
Address and Subnet Mask, and
Source/Destination Port.
Click on the Add/Apply button to add and apply
settings.