Filter
Top Products
DSL-510 ADSL Router User’s Guide
4
Hub or Switch to Router Connection
Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as shown in the
diagram below:
Power On Router
To power on the device:
1. Insert the AC Power Adapter cord into the power receptacle located on the back of the Router and plug the adapter into
a nearby power source.
2. You should see the Power LED indicator light up and remain lit.
If you wish to reserve the
uplink port on the switch o
r
hub for another device,
connect to any on the othe
r
MDI-X ports (1x, 2x, etc.) with
a cross-wired cable or use
crossover adapter.
DSL-510