Filter
Top Products
DSL-510 ADSL Router User’s Guide
59
Advanced＞PPP＞PPP Account Configuration
User Name: The name you use to log in to your ISP each time this PPP connection is established.
Password: The password you use to log in to your ISP each time this PPP connection is established.
ADSL
The ADSL Configuration page allows the user to set the configuration for ADSL protocols.
Trellis: This field allows the user to enable or disable the Trellis Code. By default, it is always enabled.
Handshake Protocol: This field allows the user to select the ADSL handshake protocol.
Wiring Selection: This field allows the user to enter the wiring selection for RJ-11. Tip/Rip is the default for the board
without the inner/outer pair relay.
Bit Swapping: This field allows the user to enable or disable the upstream bit swapping.