Filter
Top Products
DSL-510 ADSL Router User’s Guide
60
SNMP
SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports
activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of
the DSL-510.The DSL-510 supports SNMP v1, v2.
System Name: The name referencing the virtual service.
System Location：The physical location of this node (e.g., 'telephone closet, 3rd floor').
System Contact：The textual identification of the contact person for this managed node, together with information on how
to contact this person.
Get Community: Enter the password public in this field to allow "Read only" access to network administration using
SNMP. You can view the network, but no configuration is possible with this setting.
Set Community: Enter the password private in this field to gain "Read and Write" access to the network using SNMP
software. The administrator can configure the network with setting
Trap Receiver: The receiver IP will be receive the SNMP Trap message from the ADSL unit.