D-Link DSL-510 Network Router User Manual


 
DSL-510 ADSL Router User’s Guide
v
About This User’s Guide
This user’s guide provides instructions on how to install the DSL-510 ADSL Router and use it to connect
a computer or Ethernet LAN to the Internet.
If you are using a computer with a functioning Ethernet port, you can use the Quick Installation Guide to
quickly establish your ADSL connection and access the Internet.
ADSL services are provided by, and sold by a variety of businesses. Your ADSL service provider may be
your telephone company, an Internet service provider (ISP), a business that specializes in providing
network services or a combination of any of these. This guide uses the generic terms DSL service
provider and network service provider, to refer to any business or agent that provides DSL service.
Guide Overview
Chapter 1 Introduction describes the Router and its key features. Provides an introduction to ADSL.
Lists standards to which the Router complies. Contains a packing list.
Chapter 2 – Hardware Installation discusses how to connect the Router to an Ethernet LAN.
Chapter 3 First Time Set Up provides information on how to configure the Router and establish the
ADSL connection using the Web-based manager.
Chapter 4 Web based Configuration describes how to use the web-based manager to change to
change Router settings and configure additional virtual connections (PVCs).
Appendix A - Technical Specifications is a list the technical specifications of the Router, including
standards compliance.
Appendix B – Microfilters and Splitters describes the contains illustrated examples of how to use low
pass filters.