Filter
Top Products
42
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON 1 and 2
on the remote control (
6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button rst. Then
using the ▲/▼ buttons sets one of the following functions to the chosen
button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
•
e-SHOT: Displays the e-SHOT menu
(
52).
•
INFORMATION: Displays a dialog of INPUT -INFORMATION- or NETWORK
-INFORMATION-
(
44, 53).
The displayed dialog is switched as below every time the MY BUTTON is
pushed.
When an input signal is found:
INPUT -INFORMATION-
NETWORK -INFORMATION-
OFF
When an input signal is not found:
NETWORK -INFORMATION-
ó
OFF
• AUTO KEYSTONE EXECUTE:
Performs automatic keystone distortion correction (
34).
• MY MEMORY: Loads one of adjustment data stored (
27).
When more than one data are saved, the adjustment changes every time
the MY BUTTON is pushed.
When no data is saved in memory, the dialog
"No saved data" appears.
When the current adjustment is not saved
to memory, the dialog as shown in the right
appears.
If you want to keep the current adjustment, please press the ◄ button to
quit. Otherwise loading a data will lose the current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (
24).
• FILTER RESET: Displays the lter time reset conrmation dialogue (
41).
• VOLUME+: Set the volume up.
• VOLUME-: Set the volume down.
SERVICE
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or the
ENTER button to execute the item.
FAN SPEED
ó
AUTO ADJUST
ó
GHOST
ó
FILTER MESSAGE
ó
KEY LOCK
FACTORY RESET
ó
I NFORMATION
ó
REMOTE FREQ.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed
of the cooling fans. The HIGH is the mode for use at
highlands etc. Note that the projector is noisier when the
HIGH is selected.
HIGH
ó
NORMAL
OPTION menu (continued)
OPTION menu
(continued on next page)