Filter
Top Products
53
NETWORK menu
Item Operation
INFORMATION
Selecting this item displays the
NETWORK -INFORMATION- dialog
for conrming the network settings.
• Only the rst 16 characters of the projector name are displayed.
• Nothing (blank) is shown in the NAME field until you setup the
item. For setup, please refer to “Network Settings” section of
User’s Manual - Network Guide.
• When the voltage level of the battery for the internal clock
decreases, set time may become incorrect even though accurate
date and time are input. Replace a battery through the following the
instructions. (
57)
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
“0.0.0.0” when DHCP is ON and the projector has not gotten
address from DHCP server.
SERVICE
Executing this item restarts and initializes the network functions.
Choose the RESTART using the button ►.
Then use the button ▲ to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART, NETWORK menu may not be controlled
approx. 30 seconds.
NETWORK menu (continued)