Filter
Top Products
Product features
5
Components
The router has been designed to be placed on a desktop. All of the cables exit from the rear of
the router for better organization and utility. The LED indicators are easily visible on the front
of the router to provide you with information about network activity and status.
Front panel
# Component Description
1 Antenna Lets the router communicate with a wireless client (card or USB adapter).
2 Power/ready LED When you apply power to the Router or restart it, a short period of time elapses
while the Router boots up. During this time, the Power/Ready LED blinks. When the
Router has completely booted up, the Power/Ready LED becomes a SOLID light,
indicating the Router is ready for use.
Off—Router is off
Blinking Green—Router is booting up
Solid Green—Router is ready
3 Security Sync button Push and hold this button for three seconds, then initiate the Security Sync (WPS)
procedure on the client device within two minutes. Your client will automatically
exchange the security information and be added to your wireless network. Pushing
the Security Sync button will automatically enable WPS. See “Using Security Sync
(Wi-Fi Protected Setup)” on page 26.
2
7
4
5
8
6
3