Filter
Top Products
35
Port VID
Configure port VID settings
From the main Tag-based (IEEE 802.1Q) VLAN page, click
Port VID Settings.
Port VID (PVID)
Set the port VLAN ID that will be assigned to untagged traffic
on a given port. This feature is useful for accommodating
devices that you want to participate in the VLAN but that don’t
support tagging. Each port of this switch allows user to set one
PVID, the range is 1~255, default PVID is 1. The PVID must be
the same as the VLAN ID the port belongs to, or the untagged
traffic will be dropped.
Ingress Filtering
Ingress filtering lets frames belonging to a specific VLAN to be
forwarded if the port belongs to that VLAN. This switch have
two ingress filtering rule as follows:
Ingress Filtering Rule 1: Forward only packets with VID
matching this port's configured VID.
Ingress Filtering Rule 2: Drop Untagged Frame.