Filter
Top Products
37
Parameter Description
Priority
You can change priority value, A value used to identify the root bridge. The
b
ridge with the lowest value has the highest priority and is selected as the
root. Enter a number 1 through 65535.
Max Age
You can change Max Age value, The number of seconds a bridge waits
without receiving Spanning-Tree Protocol configuration messages before
attempting a reconfiguration. Enter a number 6 through 40.
Hello Time
You can change Hello time value, the number of seconds between the
transmission of Spanning-Tree Protocol configuration messages. Enter a
number 1 through 10.
Forward Delay
Time
You can change forward delay time, The number of seconds a port waits
before changing from its Spanning-Tree Protocol learning and listening
states to the forwarding state. Enter a number 4 through 30.
4. The following parameter can be configured on each port,
click Apply button to modify.
Parameter Description
Port Priority
You can make it more or less likely to become the root port, the rage is
0-255,default setting is 128 the lowest number has the highest priority.
Path Cost
Specifies the path cost of the port that switch uses to determine which port
are the forwarding ports the lowest number is forwarding ports, the rage is
1-65535 and default value base on IEEE802.1D
10Mb/s = 50-600 100Mb/s = 10-60 1000Mb/s = 3-10