Edimax Technology ES-5224RM Switch User Manual


 
42
4.12 802.1X Configuration
If you enable the IEEE 802.1X function, you can configure the
parameters of this function.
System Configuration
1. Radius Server IP: Set the Radius Server IP address
2. Server Port: Set the UDP destination port for authentication
requests to the specified Radius Server.
3. Accounting Port: Set the UDP destination port for
accounting requests to the specified Radius Server.
4. Shared Key: Set an encryption key for use during
authentication sessions with the specified radius server. This
key must match the encryption key used on the Radius
Server.
5. NAS, Identifier: Set the identifier for the radius client.