Filter
Top Products
W ireless L AN AP Configuration
MAC
Address
If you want to bridge more than one wired
Ethernet networks together with wirel ess
LAN, you have to set this access point to
“AP Bridge-Point to Point mode”, “AP
Bridge-Point to Multi-Poi nt mode” or “AP
Bridge-WDS mode”. You have to enter the
MAC addresses of other access poi nts that
join the bridging work.
Associated
Clients
Click “Show Active Clients” button, then an
“Active Wireless Client Table” will pop up.
You can see the status of all active wireless
stations that are connecting to the access
point.
Click Apply button at the bottom of the screen to save the
above configurations. You can now configure other advance
sections or start using the Access Point.
Active Wireless Client Table
“Active Wireless Client T able” records the status of all active
wireless stations that are connecting to the access poi nt. You
can lookup the MAC Address, N umber of Transmitted Packets,
Number of Recei ved Packets and Encr yption Status of each
active wireless client in this table.
16