Filter
Top Products
W ireless L AN AP Configuration
Re-Enter
Password
Reconfirm the password ( up to 15-digit
alphanumeric string) you want to login
to the Access Point. Note that the
password is case-sensitive.
IP Address
Designate the Access Point’s IP
Address. This IP Address should be
unique in your network. The default IP
Address is 192.168.2.1.
Subnet Mas k
Specify a Subnet Mask for your LAN
segment. The Subnet Mask of the
Access Point is fixed and the value is
255.255.255.0.
DHCP Server Enable or disable the DHCP Server.
Click Apply button at the bottom of the screen to save the
above configurations. You can now configure other advance
sections or start using the Access Point.
3.2.7.1 DHCP Server Setting
DHCP Server will automatically give your LAN client an IP
address . If the DHCP is not enabled then you’ll have to
manually set your LAN client’s IP addr ess.
Parameter Description
Default Gateway
IP
Specify the gateway IP in your network.
This IP addr ess should be different from
the Management IP.
Domain Name
Server IP
This is the ISP’s DNS server IP address
that they gave you; or you can specify
your own preferred DNS ser ver IP
address .
36