Filter
Top Products
Introduction
y Antenna Connector
This round connection is standard R everse SMA connector
where any antennas with Reverse SMA connector can
connect to the Access Point.
y DC Adapter Port
Insert the power jack of the power adapter into this port.
y LAN Port
The Access Point’s LAN port is where you connect to your
LAN’s networ k devices.
y Reset
The Reset button allows you to do one of two things.
1) If problems occur with your Access Point, press the reset
button with a pencil tip (for less than 4 seconds) and the
Access Point will re-boot itself, keeping your original
configurations.
2) If problems persist or you experience extreme problems
or you forgot your password, press the reset button for
longer than 4 seconds and the Access Point will reset
itself to the factor y default setti ngs (warning: your original
configurations will be replaced with the factory default
settings).
4