Filter
Top Products
- 13 -
Reset Button
Reset Button
4. The software will prompt you to press the reset button. (reset button is
located on the back of the EZ 250)
5. After the programming status disappears disconnect the cables from the
computer and press the reset button on the back of the EZ 250 and you are
ready for the installation of the EZ 250
6. Now you can save the configuration for another install
Selecting Contact Closure
Use the contact closure feature on the EZ 250 by selecting switch relay, and
then pick which button will activate the relay and then select which relay 1 or 2
(you may have multiple buttons select the same relay).