Eiki EZ 250 Projector User Manual


 
- 21 -
Installing EZ 250
with another EZ 250
1. Follow steps 1 – 7 in Install EZ 250 with 1 device for the first device
2. If connecting to another EZ 250 connect a db9 female to female cable
between the RS232- 2 port on the first EZlink interface and the RS232-2
port on the second EZlink interface.
3. Set your dip switches (see page 25)
4. Plug the power supply into the wall outlet
5. You are ready to control your data projector