- 17 -
Labeling Buttons
1. Using scissors cut out the labels from sheet of transparencies
(Refer to EZloader button layout for placement of label)
2. Remove the button cap from EZtrol’s front panel with a thin blade
3. With a thin blade lift the top up of the lens from the diffuser
Diffuser Lens
4. Remove plastic plate that lays in between the lens and the diffuser
Plastic Plate Lens Diffuser
5. Place label between lens and plastic plate. When reassembling make
sure the flat end of the plastic plate faces the lens
Black
Screen
Lens Plastic Plate Diffuser