Filter
Top Products
15D1
TOUCHCOMPUTER USER GUIDE 16
Head Power Status LED
The head power status is indicated by a different LED, which is located at the lower
edge of the head (#3 in figure on page 13).
LED Color to Observer State
Off No input power to head — Off mode
Red Input power present, power switch off — Off mode
Amber Input power present — Sleep mode
Green Input power present — On mode
Touch Power Status LED
The touch power status is indicated by a separate LED located at the lower edge of
the head and to the right of the Head Power Status LED (#4 in figure on page 13).
This feature is available for AT and APR 7010.
LED Color to Observer State
Off No input power — Off mode
Red Input power present, power switch off — Off mode
Amber Input power present — Sleep mode
Green Input power present — On mode
HDD Activity LED
Hard disk drive activity is indicated by a flashing LED on the base, just under the
computer power LED (#1 in the figure on page 13). Reading from and writing to the
disk causes the LED to flash.
LED Color to Observer State
Off No activity
Flashes green Activity