Filter
Top Products
15D1
TOUCHCOMPUTER USER GUIDE 23
2. Slide a card through the MSR and verify that the data is displayed in the
application window.
3. If the card ID appears in the Reader Output window, the reader is functioning.
Customer Display
You can optionally add a customer display to the D-Series touchcomputer. Each
display has two lines of 20 characters (2x20 VFD). Software application and
drivers can be found at the following location www.elotouch.com
The customer display can be adjusted to a 30-degree range up and down and
swivels 30 degrees side to side.
Customer
display
Display rotates 30° up
and down, and swivels
30° left to right