Filter
Top Products
15D1
TOUCHCOMPUTER USER GUIDE 52
iv) Plug the digital device into a different AC outlet so the digital device
and the receiver are on different branch circuits.
v) Disconnect and remove any I/O cables that the digital device does
not use. (Unterminated I/O cables are a potential source of high RF
emission levels.)
vi) Plug the digital device into only a grounded outlet receptacle. Do not
use AC adapter plugs. (Removing or cutting the line cord ground may
increase RF emission levels and may also present a lethal shock
hazard to the user.)
vii) If you need additional help, consult your dealer, manufacturer, or an
experienced radio or television technician.
III. Agency Certifications
The following certifications have been issued for the touchcomputer:
• UL/cUL • FCC • TUV
• CE • CB • Argentina S-mark
• Russia GOST-R • Australia C-Tick • Japan VCCI
• China CCC • Taiwan BSMI • Korea KC
• Mexico COC • •