Technical data
ELSA ECOMO 5 30
19
English
Technical data
Power management function
The ELSA ECOMO 530 complies with the guidelines set by VESA and Energy Star toge-
ther with the stringent standards of NUTEK. The ELSA ECOMO 530 will automatically
reduce power consumption if the monitor is connected to a graphics board complying
with VESA DPMS. You can set the delay time before the monitor enters the power saving
mode using the on-screen menu.
CRT
Diagonal 48.3cm /19",
viewable display size 365 x 274mm/18"
Gun In-line
Deflection angle 90 °
Phosphors Red, green, blue
(P22, medium short persistence)
Phosphor color
coordinates
Red, Green, Blue
X = 0.625 X = 0.280 X = 0.155
Y = 0.34 Y = 0.605 Y = 0.070
Slot mask 0.24 - 0.25 mm
Face plate anti-glare, anti-reflective, anti-static coating
Focusing method Dynamic beam forming
Input signal
Video 0.7V or 1V RGB analog
Synchronization Synchronization signals on green or separate horizontal/
vertical synchronization
Interface
Input connector D sub 15HD
Input impedance 75
Ω
(video) 2.2k
Ω
(sync)
Frequency range
Horizontal: 30–107kHz, vertical: 48–120Hz
Resolution
Horizontal: up to 1600 pixels, vertical: up to 1200 lines at 85Hz
Warm-up time
30min. to reach optimum performance temperature
Brightness
110cd/m
2
± 10 cd/m² standard full white video with 9300 K (+8MPCD)
Blanking time
Horizontal < 2.8
µ
s
Vertical < 400
µ
s
Viewable display
364,8mm x 273,6mm, relation 4:3
9300K 5000K Gamma value (
γ)
= 2.5
X = 0.283 ± 0.015 X = 0.346 ± 0.015
Y = 0.298 ± 0.015 Y = 0.359 ± 0.015
Color temperature
9300K-5000K
Power supply
AC 100–120 V/220–240 V; ±10 %, 50–60 Hz,
ȅ
140 W
Operating
environment
Temperature
Humidity
10° – 40 °C
10 – 80% relative air humidity
Housing
449 x 463 x 463 mm (W x H x D)
Weight
26 kg approx.
Tilt and
swivel base
Tilt angle
Swivel angle
-5° – +15°
± 90°
Approvals and
Safety (CE) UL1950 (UL), CSA C22.2, No. 950 (C-UL), EN 60950
certifications
EMC (CE/FCC) FCC Class B, EN 55022, EN 50082-1, EN 61000-3-2,
EN61000-3-3
X-radiation DHHS, German X-ray regulations dated 1987-01-08
Others CE-Marking, MPR II/TCO ’91, ISO 9241-3, ISO 9241-7, ISO
9241-8, (certified by TÜV safety approved), TCO ’99, Inter-
national Energy Star Program