Filter
Top Products
Introduction
ELSA ECOMO 5 30
1
English
Introduction
This manual tells you how to connect, adjust and care for your monitor. This manual also
provides technical specifications and instructions for troubleshooting problems you may
experience with your monitor.
Monitor features
The Diamond monitor is an intelligent, microprocessor-based monitor compatible with
most analog RGB (red, green, blue) display standards, including PS/V, PS/2, Apple Mac-
intosh, Centris, Quadra, Macintosh II and Power Macintosh products. It provides crisp
text and vivid color graphics with VGA, SVGA, XGA (non-interlaced), and most Macintosh
compatible color graphics boards.
The monitor’s wide auto-scanning compatibility range makes it possible to upgrade
graphics boards or software without needing to purchase a new monitor.
Digitally controlled auto-scanning is done using an internal microprocessor, for
horizontal scan frequencies between 30kHz and 107kHz, and vertical scan frequen-
cies between 48kHz and 120Hz. The microprocessor-based intelligence allows the
monitor to operate in each frequency mode with the precision of a fixed frequency
monitor.
The monitor contains resident memory for pre-programmed screen display stan-
dards and is also capable of storing additional user adjustment parameters.
The monitor is capable of producing a non-interlaced maximum addressable resolu-
tion format of 1600 dots x 1200 lines with systems based on IBM. This display is
well suited for windowing environments.
Because of the analog signal inputs, the monitor can display an unlimited palette of
colors that can be manually adjusted to suit your specific needs.
The monitor has a power management function according to the standard of VESA-
DPMS, NUTEK
and Energy Star. To save energy, the monitor must be connected to
a system compliant with this standard. (Refer to your computer and/or graphics
board instructions for proper operation.)
To ensure the easy installation and operation of this monitor, a moiré clear function
and an on-screen display (OSD) present all of the functions for setup and adjust-
ment.
The monitor complies with the safety standards UL 1950, CSA C22.2 No. 950 and
EN60950, FCC Class-B, VCCI Class-B and EN55022 Class-B for EMI, MPR II, and with
the ergonomics standards ISO 9241-3, ISO9241-7, ISO9241-8 and ZH1/618.
Digital chassis design for lighter, more compact housing and improved display per-
formance.