ELSA 530 Computer Monitor User Manual


 
Technical data
ELSA ECOMO 5 30
20
English
Factory settings
To minimize the need for adjustment, the factory settings include popular display stan-
dards. Picture size and centering are automatically adjusted if any of these display stan-
dards is detected. All the factory presets may be overwritten by adjusting the user
controls. The monitor is capable of automatically storing up to 15 additional display stan-
dards. The new display information must differ from any of the existing display standards
by at least 1kHz for the horizontal scan frequency or 1Hz for the vertical scan frequency
or the sync signal polarities must be different.
The VGA D-shell socket
Pin assignment
The ELSA ECOMO 530 issues analog signals in accordance with the requirements of
directive RS-170. The synchronization information is sent separately.
Video input connection to an
Apple Macintosh computer
Your ELSA monitor can be connected to a Macintosh computer. The graphics output port
of the Macintosh has a 15-pin connector. To match up with the monitors VGA connector
you require a suitable adapter. Contact your retailer for details.
Connection Signal Connection Signal
1 Red 9 not used
2 Green 10 Sync ground
3 Blue 11 Ground
4 Ground 12 Bidirectional data (SDA, DDC1/2B)
5 CPU host
ground
13 Horizontal synchronization
6 Red ground 14 Vertical synchronization
7 Green ground 15 Data timing (SCL, DDC2B)
8 Blue ground