eMachines 8513152 Personal Computer User Manual


 
Chapter 4: Upgrading Your Computer
32
Preventing static electricity
discharge
The components inside your computer are extremely sensitive
to static electricity, also known as electrostatic discharge (ESD).
Before opening the computer case, follow these guidelines:
Wear a grounding wrist strap (available at most
electronics stores) and attach it to a bare metal part of
your computer.
Turn off your computer.
Touch a bare metal surface on the back of the computer.
Unplug the power cord and the modem and network
cables.
Before working with computer components, follow these
guidelines:
Avoid static-causing surfaces such as carpeted floors,
plastic, and packing foam.
Remove components from their antistatic bags only
when you are ready to use them. Do not lay components
on the outside of antistatic bags because only the inside
of the bags provide electrostatic protection.
Always hold expansion cards by their edges or their
metal mounting brackets. Avoid touching the edge
connectors and components on the cards. Never slide
expansion cards or components over any surface.
Opening the case
Your computer case provides easy access to internal
components.
Warning
To avoid exposure to dangerous electrical voltages and moving parts, turn
off your computer and unplug the power cord and modem and network cables
before opening the case.
To prevent risk of electric shock, do not insert any object into the vent holes of
the power supply.
Caution
ESD can permanently damage electrostatic discharge-sensitive
components in your computer. Prevent ESD damage by following ESD guidelines
every time you open the computer case.
8513152.book Page 32 Wednesday, May 14, 2008 4:57 PM