Filter
Top Products
1 AMC-S402
Overview
The AMC-S402 is an Advanced Mezzanine Card (AMC) module which incorporates an
enterprise class dual port SAS disk drive onto the module. The module boasts several unique
features intended to help embedded systems designers address both thermal and signal
integrity design challenges associated with in-chassis ATCA and MicroTCA applications.
The AMC-S402 includes new signal integrity ‘tuning’ circuits to adjust and optimize the high
speed SAS serial links to best match the electrical routing environment of your specific ATCA
or microTCA backplanes. These signal wave-shape parameters are stored in non-volatile
memory installed on the module.
The AMC-S402 was developed as single-width AMC, with ship options for mid or full height
panels. All hard drives are 2.5” small form factor, and spin at a minimum 10,000 rotations
per minute (RPM). The AMC-S402 also includes a module management controller (MMC).
1.1 Features of the AMC Module
The AMC-S402 is an AMC module with the following major features:
Accommodates a single 2.5" SAS hard drive
Dual path SAS support, AMC Port 2 primary, AMC Port 3 secondary
Drive over-current protection
General Advanced Mezzanine Card Features
Ejector switches for hot swap
Wave shape capability, for SAS transmit signals
One blue hot swap LED
OOS (Out-of-Service) LED
ACT LED indicates in-service state and I/O activity
Refer to Chapter 5 “Specifications” for additional details regarding env
i
ronmental,
mechanical, power specifications, as well as reliability and compliance statements.
1.2 PICMG Standards Compliance
The AMC-S402 is fully compliant with the following PCI Industrial Computer
Manufacturers Group (PICMG) specifications:
PICMG AMC.0 Rev2.0 (See section 5.1.1 for height exceptions)
AMC.3 Re
vision 1. storage signaling option
1.3 Products Supported by this Manual
The information in this manual applies to the following Emerson products:
AMC-S402-M-146G
AMC-S402-M-300G
6806800H60A AMC-S402 Installation and Use 1