Filter
Top Products
Chassis Device Commands Supported IPMI Commands
AXP1406/AXP1600 Subsystem IPMI Programmer’s Reference (6806800B66C)
17
1.2.4 Chassis Device Commands
The IPMC supports the following chassis device commands.
1.2.5 Event Commands
The IPMC supports the following event commands.
1.2.6 PEF and Alerting Commands
The IPMC supports the following PEF and alerting commands.
Table 1-4 Supported Chassis Device Commands
Command
NetFn
Rq/Rs CMD
Active
ShelfMgr
Physical
ShelfMgr PEMs FTMs
ATCA
Blades
Get Chassis Capabilities 0x00/0x01 0x00 X X
Get Chassis Status 0x00/0x01 0x01 X X
Chassis Control 0x00/0x01 0x02 X X
Set Chassis Capabilities 0x00/0x01 0x05 X X
Set System Boot Options* 0x00/0x01 0x08 X
Get System Boot Options* 0x00/0x01 0x09 X
*The data portion of these commands are blade-specific. Refer to the respective blade specification.
Table 1-5 Supported Event Commands
Command NetFn Rq/Rs CMD
Active
ShelfMgr
Physical
ShelfMgr PEMs FTMs
ATCA
Blades
Set Event Receiver 0x04/0x05 0x00 X X X X X
Get Event Receiver 0x04/0x05 0x01 X X X X X
Platform Event (a.k.a. “Event
Message”)
0x04/0x05 0x02 X X *
*ATCA-F101 supports this command.
Table 1-6 Supported PEF and Alerting Commands
Command
NetFn
Rq/Rs CMD
Active
ShelfMgr
Physical
ShelfMgr PEMs FTMs
ATCA
Blades
Get PEF Capabilities 0x04/0x05 0x10 X X
Arm PEF Postpone Timer 0x04/0x05 0x11 X X
Set PEF Configuration Parameters 0x04/0x05 0x12 X X
Get PEF Configuration Parameters 0x04/0x05 0x13 X X