Filter
Top Products
4
INTRODUCTION
Congratulations on your choice of the Liebert GXT2U™ Uninterruptible
Power System (UPS). It provides conditioned power to microcomputers and
other sensitive electronic equipment.
Upon generation, AC power is clean and stable. However, during transmission
and distribution it may be subject to voltage sags, spikes, or complete power
failure that may interrupt computer operations, cause data loss, or even
damage equipment. The Liebert GXT2U protects equipment from these
disturbances.
The Liebert GXT2U is rated for 2700 VA, 1890 watts. Complete model
specifications appear at the end of this manual.
The Liebert GXT2U is a compact, “on-line” UPS. An on-line UPS continuously
conditions and regulates its output voltage, whether utility power is present
or not. It supplies connected equipment with clean sine wave power. Sensitive
electronic equipment operates best from sinewave power.
For ease of use, the Liebert GXT2U features a light-emitting diode (LED)
display to indicate either load percentage or battery capacity depending upon
the mode of operation. It also provides self-diagnostic tests, a combination ON/
Alarm Silence/Manual Battery Test button, a Standby button, user
configurable program, and two levels of alarms when the unit is operating on
battery.
The Liebert GXT2U has an interface port for communication between the UPS
and a network server or other computer systems. This port provides detailed
operating information including voltages, currents, and alarm status to the
host system when used in conjunction with Liebert MultiLink™ software.
Liebert MultiLink software can also remotely control UPS operation.
DISCONTINUED
PRODUCT