Filter
Top Products
Installation and Configuration
21
5.4 IT Power System Configuration—Liebert
®
GXT3-6000RTL630
™
Only
1. Remove screws on the IT Power System Access Cover as shown in Figure 17.
2. Disconnect the connectors as shown in figure.
3. Reinstall IT Power System Access Cover and screws.
Figure 17 Remove cover from IT Power System Connectors compartment
!
WARNING
Risk of electric shock. Can cause injury or death.
Disconnect all local and remote electric power supplies before working within. Ensure that
the Liebert GXT3 is shut down and power has been disconnected before beginning any work
on or in the unit.
Remove Screws
IT Power System
Connectors