Filter
Top Products
2
ELECTROMAGNETIC COMPATIBILITY—The Liebert
®
GXT3
™
complies with the limits for a
Class A digital device, pursuant to Part 15 of FCC rules.
Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause unde-
sired operation. Operating this device in a residential area is likely to cause harmful interference
that users must correct at their own expense.
The Liebert GXT3 series complies with the requirements of EMC Directive 2004/108/EC and the pub-
lished technical standards. Continued compliance requires installation in accordance with these
instructions and use of accessories approved by Emerson.
NOTICE
This is a product for restricted sales distribution to informed partners. Installation
restrictions or additional measures may be needed to prevent radio interference.
Operate the UPS in an indoor environment only in an ambient temperature range of 0-40°C
(32-104°F). Install it in a clean environment, free from moisture, flammable liquids, gases and corro-
sive substances.
The Liebert GXT3-5000RT208
™
, Liebert GXT3-6000RT208
™
and the Liebert GXT3-6000RTL630
™
contain no user-serviceable parts except the internal battery pack. The Liebert GXT3-10000RT208
™
and the Liebert GXT3-8000RT208
™
contain no user-serviceable parts except the internal battery pack
and the Power Module. The UPS On/Off push buttons do not electrically isolate internal parts. Under
no circumstances attempt to gain access internally due to the risk of electric shock or burn.
Do not continue to use the UPS if the front panel indications are not in accordance with these operat-
ing instructions or the UPS performance alters in use. Refer all faults to your dealer.
Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and
the required precautions. Keep unauthorized personnel away from the batteries. Keep unauthorized
personnel away from the batteries. Proper disposal of batteries is required. Refer to your local laws
and regulations for disposal requirements.
Never block or insert any object into the ventilation holes or other openings.
DO NOT CONNECT equipment that could overload the UPS or demand DC current from the UPS,
for example: electric drills, vacuum cleaners, laser printers, hair dryers or any appliance using half-
wave rectification.
Storing magnetic media on top of the UPS may result in data loss or corruption.
Turn Off and isolate the UPS before cleaning it. Use only a soft cloth, never liquid or aerosol cleaners.
Information for the Protection of the Environment
UPS SERVICING—This UPS makes use of components dangerous for the environment (electronic
cards, electronic components). The components removed must be taken to specialized collection and
disposal centers.