Filter
Top Products
Unloading
10
5.0 UNLOADING
The unit frame is bolted to the shipping pallet to ensure safety. Liebert recommends using a pallet
jack to transport the unit to its operating location prior to unbolting the unit.
5.1 Unloading the Maintenance Bypass Cabinet
1. Once the Maintenance Bypass Cabinet is near the
desired operating location, remove the cardboard
cover.
2. Use a 1/2" (13mm) wrench to remove the eight
mounting bolts (four per bracket) from the pallet
brackets. Remove mounting brackets from the pallet
and Maintenance Bypass Cabinet. Keep brackets and
bolts for future transportation of the Maintenance
Bypass Cabinet or for securing the cabinet to the
floor.
3. Remove the metal ramp from the bottom of the pallet,
rotating it 180°. Fit ramp onto opposite side of pallet (in slot) as shown below.
4. Using two people, slowly roll the Maintenance Bypass Cabinet down the ramp until the
Maintenance Bypass Cabinet is on a level surface (see below, left).
5. Once the Maintenance Bypass Cabinet is in the desired location, adjust the leveling feet to secure
its position (see below, right).
!
CAUTION
This Maintenance Bypass Cabinet is heavy (see weight in Table 2). At least two people
should assist to unload it from the pallet.
Mounting bolts
in bracket
Metal ramp
storage area
Ramp fitted
to pallet
Adjustable
leveling foot
Casters
Ease Maintenance Bypass
Cabinet down ramp