Filter
Top Products
INSPEED™ SAN STORAGE SWITCH MODEL 355 CHAPTER 3 SWITCH MANAGEMENT
USER’S GUIDE
37
The color of each zone indicates its status. See the descriptions in the following table:
The Zone Initialization Master Port field displays the port number of the port that is currently assigned as
the master for that particular zone. The Initialization Master is responsible for starting the change
notification process in each zone.
To add ports to a zone:
1. Select the appropriate check boxes to place ports into zones.
2. Click Submit.
To activate zoning:
1. Select the Zoning Active check box near the bottom of the page.
2. Click Submit.
To remove a port from a zone:
1. Clear the appropriate check box.
2. Click Submit.
To remove all ports from a zone:
1. Click Clear at the end of the row of check boxes for the appropriate zone.
2. Click Submit.
To remove all zones:
1. Click All under the Clear Zone heading.
2. Click Submit.
Color Description
Down (red) One or more ports have been selected, zoning has been activated, but
hardware has caused a failure.
Up (green) Ports have been selected, zoning has been activated, and the FC-AL
circuit is operational.
Not Active (yellow) Ports have been selected but zoning has not been activated.
Undefined (gray) No ports have been selected.
Caution: Clearing the Zoning Active check box will deactivate all zones, which may degrade
system performance or compromise security.