Filter
Top Products
EMULEX MODEL 375 SAN STORAGE SWITCH
USER’S GUIDE CHAPTER 3: SWITCH MANAGEMENT
EMULEX CORPORATION 54
P
ART NUMBER 00041392-002 REV. B
Viewing Port Utilization
Port utilization measures the amount of traffic passing through a port over a period of time. For example,
if an initiator is transmitting data to a target, the initiator port displays a port utilization value (%) while the
target port does not. If the same initiator is receiving data from the target, the target port displays a port
utilization value (%) while the initiator port displays does not.
The Port Utilization page displays each port’s utilization percentage based on high, average, and low
utilization.
To change the port utilization interval:
Click Advanced Functions > Thresholds > Switch. See “Adjusting the Switch Thresholds” on
page 28 for additional information.
To view port utilization:
Click Port > Utilization.
The Port Utilization page appears.
Value Description
High The highest percentage of data communication through a port over a period
of time (measured in seconds).
Average The average percentage of data communication through a port over a
period of time (measured in seconds).
Low The lowest percentage of data communication through a port over a period
of time (measured in seconds).
Figure 3-29: Port Utilization page