Filter
Top Products
VLAN Port Configuration Screen
7-18 802.1Q VLAN Configuration Menu Screens
Screen Example
Figure 7-7 VLAN Port Configuration Screen
Field Descriptions
Refer to Table 7-6 for a functional description of each screen field.
Table 7-6 VLAN Port Configuration Screen Field Descriptions
Use this field… To…
Policy PVID
Override is
(Read-Only)
See the active override to a port as a result of an application policy.
When a port number has an asterisk next to it, selecting that Port field
will cause this field to display with the application policy number.
There are two sources of an override; 1) default policy, and 2)
authentication policy.
Authentication using 802.1X is not possible on a port in this mode.
In Figure 7-7, the override shown is 2.
36502_05
Global GVRP State [ ENABLED ]
Port Mode
[HYBRID]
[HYBRID]
[1D TRUNK]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[1Q TRUNK]
[HYBRID]
[HYBRID]
RETURN
EXITNEXT
Port
1
2
3
4
5
6
7
8
9
10
11
12
PVID
1
1
1
1
1
1
1
1
1
1
1
1
Acceptable Frame Types
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
[ADMIT TAGGED FRAMES ONLY]
[ ADMIT ALL FRAMES ]
[ ADMIT ALL FRAMES ]
Ingress
Filtering
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
[ DISABLED ]
SAVE
GVRP
Status
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
[ ENABLED ]
PREVIOUS
Policy PVID Override is 2