Filter
Top Products
Interface Statistics Screen
Device Statistics Menu Screens 10-5
10.3 INTERFACE STATISTICS SCREEN
When to Use
To obtain the MIB-II statistics of all the switch interfaces with the exception of an installed HSIM
or VHSIM.
How to Access
Use the arrow keys to highlight the INTERFACE STATISTICS menu item on the Device
Statistics Menu screen and press ENTER. The Interface Statistics screen, Figure 10-3, displays.
Frames Frwded
(Read-Only)
See the number of frames forwarded by the interface since the last
power-up or reset.
CLEAR
COUNTERS
(Command)
Temporarily reset all counters of a screen to zero, allowing the user to
observe counter activity over a period of time. For details on how to use
this field, refer to Section 3.1.4.
NOTE: Enterasys Networks’ HSIMs that support FDDI or WAN gather their own
statistics, and may be viewed via the Local Management screens of the applicable
HSIM. Refer to your HSIM documentation for information on how to access these
screens.
Table 10-2 Switch Statistics Screen Field Descriptions (Continued)
Use this field… To…