Filter
Top Products
Password Screen
Accessing Local Management 3-5
How to Access
Turn on the terminal. Press ENTER (this may take up to four times, because the COM port of the
switch auto-senses the baud rate of the terminal) until the Local Management Password screen
displays. Figure 3-2 shows the Password screen.
Screen Example
Figure 3-2 Local Management Password Screen
NOTE: You can set the same string as a Security password and SNMP Community
Name. This will allow you to access and manage the switch whether you are starting
a
Local Management session via a Telnet connection or local COM port connection, or by
using a network SNMP management application.
If you use a string for the security password and a different one for the SNMP
Community Name, the two cannot be used interchangeably to access the switch. The
access levels can also be configured to be different.
3650_10
Device Serial Number:
Device Hardware Revision:
Device Firmware Revision:
Device BOOTPROM Revision:
xxxxxxxxxxxx
xxx
xx.xx.xx
xx.xx.xx
xxxxxxxx LOCAL MANAGEMENT
Enterasys Networks, Inc.
P.O. Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
c Copyright Enterasys Networks, Inc. 2001
Enter Password: