Filter
Top Products
Port Redirect Configuration Screen
6-18 Port Configuration Menu Screens
Table 6-5 Port Redirect Configuration Screen Field Descriptions
Use this field… To…
Source Port
(Read-Only)
See which ports are currently set as source ports.
Destination Port
(Read-Only)
See which ports are currently set as destination ports.
Frame Format
(Read-Only)
See the current frame format setting: NORMAL, TAGGED, or
UNTAGGED. The default is NORMAL.
NORMAL – Frames are redirected in the format that they were
received or transmitted on the source port.
TAGGED – Frames are transmitted on the destination port with a
VLAN tag inserted according to the frame classification.
UNTAGGED – Frames are transmitted on the destination port without
a VLAN tag regardless of the format of the received frame.
Redirect Errors
(Read-Only)
See whether the corresponding source ports are configured ON to send
errored frames to the destination ports, or OFF to drop all errored
frames and only forward valid frames to the destination ports. All
redirected error frames display in the way they were received or
transmitted on the source port, regardless of the frame format setting.
Source Port [n]
(Selectable)
Select the port [n] that is to be changed to a source port. More than one
source port can be redirected to one destination port. For details, refer
to Section 6.6.1.
Destination Port [n]
(Selectable)
Select the port [n] that is to be changed to a destination port. More than
one destination port can be redirected to one source port. For details,
refer to Section 6.6.1.
Frame Format
(Selectable)
Select the frame format for the transmission of redirected frames on the
destination port. NORMAL, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format
field for details about each format. The default setting is NORMAL.