Support User Manuals

Enterasys Networks B3G124-48P Switch User Manual

Open as PDF

of 80

Installing Optional Mini-GBICs

3-4 Hardware Installation

Installing a Mini-GBIC

ToinstallaMini‐GBICthathasanMT‐RJconnector,refertoFigure 3‐1,orforaMini‐GBIC

withanLCconnector,refertoFigure 3‐2,andproceedasfollows:

1. HoldtheMini‐GBICwiththetopsidepositionedasshown,andthe7‐pinedge

connectorfacing

theportslot.

2. CarefullyaligntheMini‐GBICwiththeportslot.

3. PushtheMini‐GBICintotheportslotuntiltheMini‐GBIC“clicks”andlocksinto

place.

Figure 3-1 Mini-GBIC with MT-RJ Connector

1 Mini-GBIC (MGBIC-MT01) 4 Port slot

2 Mini-GBIC

, top side 5 Protective dust cover

3 7-pin edge connector (insertion side) 6 Release tab

previous next