Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-1
11
Logging and Switch Network Management
This chapter describes switch-related logging and network management commands and how to use
them.
11.1 PROCESS OVERVIEW: LOGGING AND NETWORK
MANAGEMENT
Switch-related logging and network management tasks include the following:
• Configuring System Logging (Section 11.2.1)
• Monitoring Switch Network Events and Statistics (Section 11.2.2)
• Managing Switch Network Addresses (Section 11.2.3)
• Configuring Simple Network Time Protocol (SNTP) (Section 11.2.4)
• Configuring Node Aliases (Section 11.2.5)
• Configuring Convergence End Points (CEP) phone detection (Section 11.2.6)
NOTE: The commands in this section pertain to network management of the Matrix E1
device when it is in switch mode only. For information on router-related network
management tasks, including reviewing router ARP tables and IP traffic, refer to
Chapter 12.