Security Configuration Command Set
Configuring RADIUS
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-3
14.3 SECURITY CONFIGURATION COMMAND SET
14.3.1 Configuring RADIUS
Purpose
To perform the following:
• Review the RADIUS client/server configuration on the device.
• Enable or disable the RADIUS client.
• Set local and remote login options.
• Set primary and secondary server parameters, including IP address, timeout period, and number
of user login attempts allowed.
• Reset RADIUS server settings to default values.
• Configure a RADIUS accounting server.
Commands
The commands needed to review and configure RADIUS are listed below and described in the
associated section as shown:
• show radius (Section 14.3.1.1)
• set radius (Section 14.3.1.2)
• clear radius (Section 14.3.1.3)
• show radius accounting (Section 14.3.1.4)
• set radius accounting (Section 14.3.1.5)
• clear radius accounting (Section 14.3.1.6)
For an overview on working with Host Access Control Authentication (HACA), refer to
Section 14.4.1.