Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-75
• set cep (Section 11.2.6.2)
• set cep port (Section 11.2.6.3)
• set cep policy (Section 11.2.6.4)
• set cep detection (Section 11.2.6.5)
• set cep detection type (Section 11.2.6.6)
• set cep detection address (Section 11.2.6.7)
• set cep detection protocol (Section 11.2.6.8)
• set cep detection porthigh (Section 11.2.6.9)
• set cep initialize (Section 11.2.6.10)
• clear cep (Section 11.2.6.11)
11.2.6.1 show cep
Use this command to display CEP phone detection settings.
show cep [connections] [detection] [policy] [[port] [port-string]]
Syntax Description
Command Defaults
If no parameters are specified, all CEP settings will be displayed for all ports.
Command Mode
Read-Only.
connections (Optional) Displays CEP connections.
detection (Optional) Displays all discovery parameters being used for
CEP detection.
policy (Optional) Displays the global CEP policy per protocol.
port port-string (Optional) Displays CEP status for one or more ports. For a
detailed description of possible port-string values, refer to
Section 4.1.2.