Enterasys Networks RBT-8110 Switch User Manual


 
Wireless Switch Configuration Tasks
3-4 Configuration
Do you want Web Portal authentication? [y]: y
Enter a username to be used with Web Portal, <cr> to exit: user1
Enter a password for user1: user1pass
Enter a username to be used with Web Portal, <cr> to exit:
Do you want to do 802.1x and PEAP-MSCHAPv2? [y]: y
Enter a crypto SSID to use: corporate
Enter a username with which to do PEAP-MSCHAPv2, <cr> to exit: bob
Enter a password for bob: bobpass
Enter a username with which to do PEAP-MSCHAPv2, <cr> to exit:
Do you wish to configure access points? [y]: y
Enter a port number [1-2] on which an AP resides, <cr> to exit: 2
Enter AP model on port 2: RBT-1602
Enter a port number [1-2] on which an AP resides, <cr> to exit:
Do you wish to configure distributed access points? [y]: y
Enter a DAP serial number, <cr> to exit: 123456789
Enter model of DAP with S/N 123456789: RBT-1602
Enter a DAP serial number, <cr> to exit:
success: created keypair for ssh
success: Type "save config" to save the configuration
RBT-8110-aabbcc# save config
RBT-8110#
6. Optionally,enableTelnet.
RBT-8110# set ip telnet server enable
7. Verifytheconfigurationchanges.
RBT-8110# show config
8. Savetheconfigurationchanges.
RBT-8110# save config