Filter
Top Products
20
Scanning from Start to Finish
Scanning with the EPSON Perfection 1650 PHOTO
If you have an EPSON Perfection 1650 PHOTO scanner, the transparency unit is
built into the scanner lid. Follow these steps to use the transparency unit:
1. Unplug the AC adapter.
2. Remove the reflective document mat. To do this, grasp the top of the mat and
then slide it up gently.
3. Make sure the TPU cable is plugged into the scanner’s transparency unit
connector.
4. Plug in the AC adapter.
basics.book Page 20 Monday, July 16, 2001 4:11 PM