Filter
Top Products
EPSON Stylus Scan 2500
9/99 EPSON Stylus Scan 2500
- 12
Turn off the EPSON Stylus Scan, then follow these steps to
clean the guide:
1. Disconnect the automatic document feeder’s connector
from the EPSON Stylus Scan’s option interface.
2. Lift the automatic document feeder straight up to remove it.
3. Remove the paper support.
4. Place the automatic document feeder on a flat surface and
turn it over. Locate the two white tabs at one end of the
paper path guide. Pull the tabs slightly up, then push them
through the brackets.
5. Pull the paper path guide up and out.
6. Using a soft, dry cloth, gently wipe any dust from the
guide’s transparent plastic sheet. Be careful not to scratch
the guide.
7. Reattach the paper path guide. Insert the transparent plastic
sheet under the white mat.
8. Insert the guide’s tabs through the brackets at the back of
the automatic document feeder. Push until the tabs clip into
place.
Related Documentation
TM-SCAN2500 EPSON Stylus Scan 2500 Service Manual
PL-SCAN2500 EPSON Stylus Scan 2500 Parts Price List
CPD-8875 EPSON Stylus Scan 2500
User’s Guide
CPD-8874 EPSON Stylus Scan 2500
Start Here
sheet